Quadcopters
Showing 1–48 of 59 results
-
Drone Frames
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
- Material: glass fiber
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- Board Dimensions : 50 x 50 x 2 mm.
- Weight: 8 gm.
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
SKU: 200219 -
-
-
-
-
-
Drone Motor
A2212 1000 KV Brushless DC Motor with SimonK 30A ESC and Orange 1045 Propeller Set
- Offers great performance and value for money.
- Suitable for airplane, aircraft, quadcopter.
- Motor KV: 1000
- LiPO Batteries: 2S-3S
- Shaft Diameter: 3.17 mm
- ESC used has an On-Board BEC.
- Propeller: Orange HD 1045
SKU: 200110 -
-
Buzzers and Speakers
Alarm Finder Tracer Buzzer for RC Lost Aircraft
- Operating Voltage : 4 – 6 V.
- Current Drain : 1 – 35 mA.
- Weight : 4.5 gm.
- Dimensions : 30 x 20 x 10 mm (L x W x H).
- Let you know where your RC aircraft is when you lose connection with it
- Particularly useful when the multirotor is out of control
- Easy to install, simply connect the alarm between the servo and the receiver
SKU: 301601 -
FPV/Telemetry/Remote Control
DIY RX5808 5.8G 40CH diversity FPV receiver with OLED display for FPV racer Quad
FPV/Telemetry/Remote ControlDIY RX5808 5.8G 40CH diversity FPV receiver with OLED display for FPV racer Quad
- Auto Search Signal
- Auto seamless switching signal between 2 receivers
- Suitable for High-Speed Racing Quad
- Suitable for HD Aerial Photography
- Suggest using a clover antenna and a panel connector for long and short distance.
SKU: 200906 -
-
Drone Transmitter and Receiver
FLY SKY FS IA6B RF 2.4GHz 6CH PPM output with iBus port receiver
- Input Power : 4.0 – 8.4 VDC (2A).
- Transmitting Power: ≤ 20 dBm.
- Model Type : Airplane / Glider / Helicopter
- Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i10, FS-GT2E, FS-GT2G
- 2.4G Mode: The second generation of an enhanced version of the automatic FM digital system.
SKU: 201010 -
-
Drone Transmitter and Receiver
FlySky FS-IA10B Radio Receiver
- No. of Channels: 10
- Model Type: Fixed-Wing/Glider/Helicopter
- RF Range: 2.4055-2.475GHz
- RF Channel: 140
- RF Receiver Sensitivity: -105dBm
- Bandwidth: 500KHz
- 2.4GHz System: AFHDS 2A
- Modulation Type: GFSK
- Oprating Voltage: 4.0-6.5V DC
SKU: 201017 -
Drone Transmitter and Receiver
FS-IA6 6CH AFHDS 2A 2.4G Radio Receiver
- Channels: 6 Channels
- Model type: Airplane / Glider / Helicopter / Multirotor
- Frequency range: 2.4–2.48GHZ
- Bandwidth number: 160
- Transmitting power: not more than 20dBm
- RF receiver sensitivity: -105dbm
- 2.4G modes: automatic frequency second generation digital systems
- Encoding: GFSK
- Data acquisition interface: None
SKU: 201005 -
Drone Transmitter and Receiver
FS-RX2A Pro Radio Receiver
- Item name: FS-RX2A Radio receiver
- Channel: 10
- RF Range: 2.408-2.475GHZ
- Number of bands: 135
- RX Sensitivity: -92dBm
- 2.4GHz protocol: AFHDS 2A
- Signal output: IBUS, PPM
- Compatible Transmitter: All AFHDS 2A Transmitter,
- Ex.: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10.
- Ex.: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10.
SKU: 201012 -
-
-
Drone Transmitter and Receiver
Mini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter
Drone Transmitter and ReceiverMini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter
- Modulation type: GFSK
- DSC port: PPM/I-BUS/S.BUS
- Antenna length: 26mm(not including brass contacts)
- Power input: 4.0-8.4V
- No ground interference( transmitting and receiving 1m from the ground): > 300m
- Operating current:40mA
- Channel delay: < 15ms
SKU: 201001 -
3 cell Lipo (11.1V ~ 12.6V)
Orange 1000mAh 3S 30C/60C Lithium polymer battery Pack (LiPo)
- Model No: ORANGE 1000/3S-30C
- Weight : 85 gm
- Voltage : 11.1V
- Dimensions : 19.5 x 34 x 72(mm )
- Max Continuous Discharge : 30C(30A)
- Balance Plug : JST-XH
- Max Burst Discharge : 60C(60A)
- Discharge Plug : XT-60
- Charge Rate : 1-3C Recommended, 5C Max
SKU: 901101 -
3 cell Lipo (11.1V ~ 12.6V)
Orange 3000mAh 3S 30C/60C Lithium polymer battery Pack (LiPo)
- Model No: ORANGE 3000/3S-30C
- Weight : 215.0 gm
- Voltage : 11.1V
- Dimensions : 17 x 43 x 136(mm)
- Max Continuous Discharge : 30C(90.0A)
- Balance Plug : JST-XH
- Max Burst Discharge : 60C(180.0A)
- Discharge Plug : XT-60
SKU: 901112 -
Drone Frames
PDB-XT60 with BEC 5V and 12V
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- Regulated 5V and 12V outputs
- Short circuit tolerantInput voltage range: 9 – 18V DC (3S-4S LiPoly operation)
- Output continuous current: 25Ax4 or 15Ax6
- Output Peak current (10 seconds/minute): 30Ax4 or 20Ax6
- Short-circuit tolerant: 5 seconds/minute
SKU: 200220 -
-
Drone Frames
Q250 Quadcopter Super Strong Carbon Fiber 4mm Arm FPV Racing Frame(250mm) Kit
- Wheelbase: 250mm
- Material: Full Carbon Fiber
- Weight: 160 gm
- The arm equips dampers for the safe landing.
- The arm has multiple motor mounting holes.
- Equips vibration-free mounting bracket for FPV camera.
SKU: 200218 -
-
-
FPV/Telemetry/Remote Control
RC832 Plus 5.8G 48CH Wireless AV Receiver
- Operating Voltage: 12VDC
- Working current: 200mA max.
- Video format: NTSC/PAL auto.
- Control Range: Approx 5 KM
- 48 channels: Cover A, B, E, F, H bands and L bands.
- Power off memory for last channel and band.
- Dual Independent video and audio signal outputs.
SKU: 200901