Deals of The Day
Go to Daily Deals SectionOriginal Boards
Arduino Portenta H7 Development Board
DUAL CORE – The PH7 has two processors in one, run parallel tasks in different languages
SELECT ENCRYPTION – Choose between two vendors for the crypto-chip that better suits your case
USB-C – Power your board, connect it to a display, or get it to work in OTG mode
MEMORY RANGE – Select the right amount and type of memory for your application
SKU: 100603
Raspberry Pi Accessories
Micro SD Card to SD Card Adapter
Convert Micro SD Card into SD Card to use in Laptop, Digital Camera, Music Player, Media Player, Photo Frames etc.
Protect and Secure MicroSD Card from Dust, Damage, Breakage by using this Adapter.
Secure Data with inbuilt Write Protection Switch.
Brand New Product and Easy to use.
SKU: 100813
Raspberry Pi Cases
New High Quality Transparent ABS Case for Raspberry Pi 3/3+ with Slot for Cooling Fan & GPIO
Raspberry Pi Cases
New High Quality Transparent ABS Case for Raspberry Pi 3/3+ with Slot for Cooling Fan & GPIO
This simple case provides tough protection for your raspberry pi along with access to ports
High Quality two-piece injection-molded ABS enclosure
Click together design, no screws, standoffs or elastic bands required
It is easy to use. You just need to click them together after you fix your pi board on it with screws.
4 x Non-slip Silicone Gaskets provided, which can be stuck to the bottom four corners of the box, to prevent it from slipping when placed on a surface.
SKU: 100911
Bread Board
SYB-170 Mini Solderless Breadboard -170 Tie Points (Green, Yellow, Black) 3Pcs
Tie-points: 170 (10x—17)
Size: 48 x 35 x 10 mm(LxWxH).
Use: experimental, testing, robot
Matching jumper, diameter 0.8mm
Phosphor bronze nickel plated spring clips
Accepts a variety of wire sizes (29-20 the AWG)
SKU: 301201
Laptops & Computers
Go to Daily Deals SectionHeadphones
Go to Daily Deals SectionStepper Motor Driver
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
Driver Chip: TB6560AHQ
Operating Voltage: 10-35V
Nominal Voltage: 24V
With the large heat sink to ensure good heat dissipation
6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: 800607
Aurdino Boards
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
Microcontroller: AT91SAM3X8E
Operating Voltage: 3.3V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Outputs Pins: 2 (DAC)
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
SKU: 100101
Aurdino Boards
Pro Mini ATMEGA328P 5V/16M (Official Version)
Microcontroller: ATmega328
Circuit Operating Voltage: 5V
Clock frequency: 16MHz.
Digital I/O Pins: 14
8 analog input port: A0 ~ A7.
A pair of TTL level serial port transceiver : RX / TX.
6 PWM port: D3, D5, D6, D9, D10, D11.
Support serial download.
SKU: 100104
Aurdino Boards
UNO Based ESP8266 Nodemcu Development Board
Based on ESP-8266EX.
Arduino compatible, using Arduino IDE to program.
Support OTA wireless upload.
Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
The direct use of Arduino IDE development, the same operation with Arduino UNO.
Operating Voltage: 3.3V
Digital I/O Pins: 11
Analog Input Pins: 1
SKU: 100105
Aurdino Boards
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board Compatible with Arduino
Microcontroller: AT91SAM3X8E
Operating Voltage: 3.3V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Outputs Pins: 2 (DAC)
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
SKU: 100106
Aurdino Boards
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
ATMEGA32U4 running in 5V / 16MHz
Support Arduino IDE V1.0.1
Micro USB interface programming on the board
Four 10-bit ADC pin
12 digital I / O (5 PWM capability)
Rx and Tx hardware serial connection
SKU: 100108
Aurdino Boards
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
Operating Voltage (logic level): 5V
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
Standard 0.1″ spacing DIP (breadboard friendly).
SKU: 100109
Aurdino Boards
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
Operating Voltage (logic level): 5V
With USB cable and Soldered Connector
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
SKU: 100110
Aurdino Boards
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
Microcontroller ATmega328 (SMD) – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 5-20V
Digital I / O Pins 14 (of which 6 provide PWM output)
Analog Input Pins: 6
SKU: 100111
TV Entertainment
Go to Daily Deals SectionRaspberry Pi Boards
Raspberry Pi 4 Model-B with 4 GB RAM
1GB/2GB/4GB Varients
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
Operating Power 5V@3A via USB Type-C Port
Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
SKU: 100709
Raspberry Pi Camera
Raspberry Pi High Quality Camera with Interchangeable Lens Base
Sony IMX477R stacked, back-illuminated sensor.
Resolution: 12.3 megapixels.
Compatible with Raspberry Pi 1/2/3/4 boards
Output: RAW12/10/8, COMP8
Back focus: Adjustable (12.5 mm–22.4 mm)
Lens standards: C-mount, CS-mount (C-CS adapter included)
IR cut filter: Integrated
SKU: 101011
Drone Motor
Set of 4 A2212 1400KV Brushless Motor for Drone with SimonK 30A ESC and Orange 1045 Propeller Set
Drone Motor
Set of 4 A2212 1400KV Brushless Motor for Drone with SimonK 30A ESC and Orange 1045 Propeller Set
Offers great performance and value for money.
Comes in the compact sizes.
Suitable for airplane, aircraft, quadcopter.
ESC used has an On-Board BEC.
Faster and Better speed control.
SKU: 200120
Soldering Tools
High Purity 0.8mm Solder wire Tube with 60/40 Tin-Lead Alloy -14gm
High-performance welding flux, high melting speed, good mobility, and good tin layer speed.
Small residual, non-corrosive, high insulation resistance, no-clean solder wire.
Widely used in electronics repair, welding line using the job. Mainly used for welding machinery welding machine, lamp, car radiator, cable joints.
Material : 60/40 rosin core (60% Tin, 40% lead+resin+flux)
Gives neat, attractive, shiny surface. Soldering
No foul smell, smoke Less, and will not splash rosin when soldering again
SKU: 400207
Smartphones & Tablets
Go to Daily Deals SectionStepper Motor Driver
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
Driver Chip: TB6560AHQ
Operating Voltage: 10-35V
Nominal Voltage: 24V
With the large heat sink to ensure good heat dissipation
6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: 800607
Aurdino Boards
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
Microcontroller: AT91SAM3X8E
Operating Voltage: 3.3V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Outputs Pins: 2 (DAC)
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
SKU: 100101
Aurdino Boards
Pro Mini ATMEGA328P 5V/16M (Official Version)
Microcontroller: ATmega328
Circuit Operating Voltage: 5V
Clock frequency: 16MHz.
Digital I/O Pins: 14
8 analog input port: A0 ~ A7.
A pair of TTL level serial port transceiver : RX / TX.
6 PWM port: D3, D5, D6, D9, D10, D11.
Support serial download.
SKU: 100104
Aurdino Boards
UNO Based ESP8266 Nodemcu Development Board
Based on ESP-8266EX.
Arduino compatible, using Arduino IDE to program.
Support OTA wireless upload.
Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
The direct use of Arduino IDE development, the same operation with Arduino UNO.
Operating Voltage: 3.3V
Digital I/O Pins: 11
Analog Input Pins: 1
SKU: 100105
Aurdino Boards
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board Compatible with Arduino
Microcontroller: AT91SAM3X8E
Operating Voltage: 3.3V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Outputs Pins: 2 (DAC)
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
SKU: 100106
Aurdino Boards
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
ATMEGA32U4 running in 5V / 16MHz
Support Arduino IDE V1.0.1
Micro USB interface programming on the board
Four 10-bit ADC pin
12 digital I / O (5 PWM capability)
Rx and Tx hardware serial connection
SKU: 100108
Aurdino Boards
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
Operating Voltage (logic level): 5V
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
Standard 0.1″ spacing DIP (breadboard friendly).
SKU: 100109
Aurdino Boards
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
Operating Voltage (logic level): 5V
With USB cable and Soldered Connector
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
SKU: 100110
Aurdino Boards
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
Microcontroller ATmega328 (SMD) – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 5-20V
Digital I / O Pins 14 (of which 6 provide PWM output)
Analog Input Pins: 6
SKU: 100111
Cameras
Go to Daily Deals SectionStepper Motor Driver
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
Driver Chip: TB6560AHQ
Operating Voltage: 10-35V
Nominal Voltage: 24V
With the large heat sink to ensure good heat dissipation
6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: 800607
Aurdino Boards
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
Microcontroller: AT91SAM3X8E
Operating Voltage: 3.3V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Outputs Pins: 2 (DAC)
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
SKU: 100101
Aurdino Boards
Pro Mini ATMEGA328P 5V/16M (Official Version)
Microcontroller: ATmega328
Circuit Operating Voltage: 5V
Clock frequency: 16MHz.
Digital I/O Pins: 14
8 analog input port: A0 ~ A7.
A pair of TTL level serial port transceiver : RX / TX.
6 PWM port: D3, D5, D6, D9, D10, D11.
Support serial download.
SKU: 100104
Aurdino Boards
UNO Based ESP8266 Nodemcu Development Board
Based on ESP-8266EX.
Arduino compatible, using Arduino IDE to program.
Support OTA wireless upload.
Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
The direct use of Arduino IDE development, the same operation with Arduino UNO.
Operating Voltage: 3.3V
Digital I/O Pins: 11
Analog Input Pins: 1
SKU: 100105
Aurdino Boards
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board Compatible with Arduino
Microcontroller: AT91SAM3X8E
Operating Voltage: 3.3V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Outputs Pins: 2 (DAC)
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
SKU: 100106
Aurdino Boards
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
ATMEGA32U4 running in 5V / 16MHz
Support Arduino IDE V1.0.1
Micro USB interface programming on the board
Four 10-bit ADC pin
12 digital I / O (5 PWM capability)
Rx and Tx hardware serial connection
SKU: 100108
Aurdino Boards
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
Operating Voltage (logic level): 5V
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
Standard 0.1″ spacing DIP (breadboard friendly).
SKU: 100109
Aurdino Boards
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
Operating Voltage (logic level): 5V
With USB cable and Soldered Connector
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
SKU: 100110
Aurdino Boards
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
Microcontroller ATmega328 (SMD) – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 5-20V
Digital I / O Pins 14 (of which 6 provide PWM output)
Analog Input Pins: 6
SKU: 100111