Product Carousel Tabs
LiPo Voltage Checker
LiPo Battery Voltage Checker 1S-8S with Buzzer
Input: 1S-8S Battery
Battery type: Lipo/LiFe/Li-ion/LiMn
It has a Buzzer Alarm for low voltage indication.
Useful for measuring each cell voltage.
Cell Voltage Display Range: 0.5v-4.5v
Total Voltage Display Range: 3.7-36v
Alarm set values: Off or 2.7-3.8v
SKU: 901605
LiPo Voltage Checker
High Quality 1-8S Battery Voltage Checker & Low Voltage Buzzer Alarm
Input: 1S-8S Battery
Battery type: Lipo/LiFe/Li-ion/LiMn
It has a Buzzer Alarm for low voltage indication.
Useful for measuring each cell voltage.
Cell Voltage Display Range: 0.5v-4.5v
Total Voltage Display Range: 3.7-36v
Alarm set values: Off or 2.7-3.8v
SKU: 901604
LiPo Voltage Checker
Cell Checker with Low Voltage Alarm (2S-8S) with case
Input: 2S-8S Battery
Battery type: Lipo/LiFe/Li-ion/LiMn
It has a Buzzer Alarm for low voltage indication.
Useful for measuring each cell voltage.
Cell Voltage Display Range: 0.5v-4.5v
Total Voltage Display Range: 3.7-36v
Alarm set values: Off or 2.7-3.8v
SKU: 901603
Parallel Charging Board
Parallel charging Board for 6 packs 2~6S (XT-60)
Charge Cell: 2~6S.
Connector type: XT-60/JST-XH
Operating Voltage: 0~22.2VDC.
Max current: 30A.
Battery: 6 packs (same capacity & cell count).
Thicken PCB copper foil, allow security using 40A charging current.
Amass 7U gold plating plug plating.
Use safety fuse (50A) to protect the circuit.
SKU: 901502
Gas Sensor
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
Operating Voltage is +5V
Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
Can be used as a Digital or analog sensor
The Sensitivity of Digital pin can be varied using the potentiometer
Long life and low cost
Simple drive circuit
SKU: 600102
Hall Effect Sensor
Linear Magnetic Hall sensor
Operating Voltage: 3.3V-5V
Features wide range voltage comparator LM393
Adjustable sensitivity
Signal output indicator with the retaining bolt hole, convenient installation
Output form digital switch output (0 and 1 high and low level)
The output effective signal is low level
When there is sound, outputs low level and the signal light
SKU: 600601
Relay Switch
12V 4 Channel Relay Module
4-Channel Relay interface board and each one needs 15-20mA Driver Current.
Both controlled by 12V and 5V input Voltage.
Equipped with high-current relay, AC250V 10A ; DC30V 10A.
Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low).
Indication LED’s for Relay output status.
SKU: 601540
GPS Module
Ublox NEO-M8N GPS with Compass for Pixhawk with extra connector for APM
Ready to Connect to PIXHAWK FC with 6-pin connector Attached
Receiver type 72-channel M8 engine
Galileo-ready E1B/C (NEO-M8N)
Nav. update rate1 Single GNSS: up to 18 HZ
Acquisition Cold starts: 26 s
Onboard Compass
SKU: 602705
Week Deals limited, Just now
%
Hurry up! Offer ends in:
LiPo Voltage Checker
LiPo Battery Voltage Checker 1S-8S with Buzzer
Input: 1S-8S Battery
Battery type: Lipo/LiFe/Li-ion/LiMn
It has a Buzzer Alarm for low voltage indication.
Useful for measuring each cell voltage.
Cell Voltage Display Range: 0.5v-4.5v
Total Voltage Display Range: 3.7-36v
Alarm set values: Off or 2.7-3.8v
SKU: 901605
LiPo Voltage Checker
High Quality 1-8S Battery Voltage Checker & Low Voltage Buzzer Alarm
Input: 1S-8S Battery
Battery type: Lipo/LiFe/Li-ion/LiMn
It has a Buzzer Alarm for low voltage indication.
Useful for measuring each cell voltage.
Cell Voltage Display Range: 0.5v-4.5v
Total Voltage Display Range: 3.7-36v
Alarm set values: Off or 2.7-3.8v
SKU: 901604
LiPo Voltage Checker
Cell Checker with Low Voltage Alarm (2S-8S) with case
Input: 2S-8S Battery
Battery type: Lipo/LiFe/Li-ion/LiMn
It has a Buzzer Alarm for low voltage indication.
Useful for measuring each cell voltage.
Cell Voltage Display Range: 0.5v-4.5v
Total Voltage Display Range: 3.7-36v
Alarm set values: Off or 2.7-3.8v
SKU: 901603
Parallel Charging Board
Parallel charging Board for 6 packs 2~6S (XT-60)
Charge Cell: 2~6S.
Connector type: XT-60/JST-XH
Operating Voltage: 0~22.2VDC.
Max current: 30A.
Battery: 6 packs (same capacity & cell count).
Thicken PCB copper foil, allow security using 40A charging current.
Amass 7U gold plating plug plating.
Use safety fuse (50A) to protect the circuit.
SKU: 901502
Parallel Charging Board
Parallel charging Board for 6 packs 2~6S (T Connector)
Charge Cell: 2~6S.
Connector type: T Connector/Jst-xh
Operating Voltage: 0~22.2VDC.
Max current: 30A.
Battery: 6 packs (same capacity & cell count).
Thicken PCB copper foil, allow security using 40A charging current.
Amass 7U gold plating plug plating.
Use safety fuse (50A) to protect the circuit.
SKU: 901501
Smartphones & Tablets
-
-
LiPo Voltage Checker
LiPo Battery Voltage Checker 1S-8S with Buzzer
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901605 -
LiPo Voltage Checker
High Quality 1-8S Battery Voltage Checker & Low Voltage Buzzer Alarm
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901604 -
LiPo Voltage Checker
Cell Checker with Low Voltage Alarm (2S-8S) with case
- Input: 2S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901603 -
-
Parallel Charging Board
Parallel charging Board for 6 packs 2~6S (XT-60)
- Charge Cell: 2~6S.
- Connector type: XT-60/JST-XH
- Operating Voltage: 0~22.2VDC.
- Max current: 30A.
- Battery: 6 packs (same capacity & cell count).
- Thicken PCB copper foil, allow security using 40A charging current.
- Amass 7U gold plating plug plating.
- Use safety fuse (50A) to protect the circuit.
SKU: 901502
Music Headphones
-
-
LiPo Voltage Checker
LiPo Battery Voltage Checker 1S-8S with Buzzer
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901605 -
LiPo Voltage Checker
High Quality 1-8S Battery Voltage Checker & Low Voltage Buzzer Alarm
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901604 -
LiPo Voltage Checker
Cell Checker with Low Voltage Alarm (2S-8S) with case
- Input: 2S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901603 -
-
Parallel Charging Board
Parallel charging Board for 6 packs 2~6S (XT-60)
- Charge Cell: 2~6S.
- Connector type: XT-60/JST-XH
- Operating Voltage: 0~22.2VDC.
- Max current: 30A.
- Battery: 6 packs (same capacity & cell count).
- Thicken PCB copper foil, allow security using 40A charging current.
- Amass 7U gold plating plug plating.
- Use safety fuse (50A) to protect the circuit.
SKU: 901502
Top Categories this Week
Laptops & Computers
-
Stepper Motor Driver
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: 800607
-
-
LiPo Voltage Checker
LiPo Battery Voltage Checker 1S-8S with Buzzer
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901605 -
LiPo Voltage Checker
High Quality 1-8S Battery Voltage Checker & Low Voltage Buzzer Alarm
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901604 -
LiPo Voltage Checker
Cell Checker with Low Voltage Alarm (2S-8S) with case
- Input: 2S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901603 -
-
Parallel Charging Board
Parallel charging Board for 6 packs 2~6S (XT-60)
- Charge Cell: 2~6S.
- Connector type: XT-60/JST-XH
- Operating Voltage: 0~22.2VDC.
- Max current: 30A.
- Battery: 6 packs (same capacity & cell count).
- Thicken PCB copper foil, allow security using 40A charging current.
- Amass 7U gold plating plug plating.
- Use safety fuse (50A) to protect the circuit.
SKU: 901502
Home Enternteinment
-
Stepper Motor Driver
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: 800607
-
-
LiPo Voltage Checker
LiPo Battery Voltage Checker 1S-8S with Buzzer
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901605 -
LiPo Voltage Checker
High Quality 1-8S Battery Voltage Checker & Low Voltage Buzzer Alarm
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901604 -
LiPo Voltage Checker
Cell Checker with Low Voltage Alarm (2S-8S) with case
- Input: 2S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 901603 -
-
Parallel Charging Board
Parallel charging Board for 6 packs 2~6S (XT-60)
- Charge Cell: 2~6S.
- Connector type: XT-60/JST-XH
- Operating Voltage: 0~22.2VDC.
- Max current: 30A.
- Battery: 6 packs (same capacity & cell count).
- Thicken PCB copper foil, allow security using 40A charging current.
- Amass 7U gold plating plug plating.
- Use safety fuse (50A) to protect the circuit.
SKU: 901502