Product Carousel Tabs
Bestsellers
Smartphones
-
Stepper Motor Driver
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: 800607 -
Aurdino Boards
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: 100101 -
Laptops & Computers
-
Stepper Motor Driver
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: 800607 -
Aurdino Boards
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: 100101 -
Laptops & Computers
Smartphones
Stepper Motor Driver
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
Driver Chip: TB6560AHQ
Operating Voltage: 10-35V
Nominal Voltage: 24V
With the large heat sink to ensure good heat dissipation
6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: 800607
Aurdino Boards
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
Microcontroller: AT91SAM3X8E
Operating Voltage: 3.3V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Outputs Pins: 2 (DAC)
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
SKU: 100101
Aurdino Boards
Pro Mini ATMEGA328P 5V/16M (Official Version)
Microcontroller: ATmega328
Circuit Operating Voltage: 5V
Clock frequency: 16MHz.
Digital I/O Pins: 14
8 analog input port: A0 ~ A7.
A pair of TTL level serial port transceiver : RX / TX.
6 PWM port: D3, D5, D6, D9, D10, D11.
Support serial download.
SKU: 100104
Aurdino Boards
UNO Based ESP8266 Nodemcu Development Board
Based on ESP-8266EX.
Arduino compatible, using Arduino IDE to program.
Support OTA wireless upload.
Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
The direct use of Arduino IDE development, the same operation with Arduino UNO.
Operating Voltage: 3.3V
Digital I/O Pins: 11
Analog Input Pins: 1
SKU: 100105
Aurdino Boards
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board Compatible with Arduino
Microcontroller: AT91SAM3X8E
Operating Voltage: 3.3V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Outputs Pins: 2 (DAC)
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
SKU: 100106
Aurdino Boards
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
ATMEGA32U4 running in 5V / 16MHz
Support Arduino IDE V1.0.1
Micro USB interface programming on the board
Four 10-bit ADC pin
12 digital I / O (5 PWM capability)
Rx and Tx hardware serial connection
SKU: 100108
Aurdino Boards
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
Operating Voltage (logic level): 5V
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
Standard 0.1″ spacing DIP (breadboard friendly).
SKU: 100109
Aurdino Boards
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
Operating Voltage (logic level): 5V
With USB cable and Soldered Connector
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
SKU: 100110
Aurdino Boards
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
Microcontroller ATmega328 (SMD) – Interface CH340G
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 5-20V
Digital I / O Pins 14 (of which 6 provide PWM output)
Analog Input Pins: 6
SKU: 100111
Recently Viewed
Raspberry Pi Accessories
RTL8188 Mini USB wireless Network Card 150Mbps Wifi Dongle
RTL8188cus Chipset
Mini portable USB 2.0 design.
Wireless N speed up to 600Mbps, ideal for internet surfing and online gaming.
Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards.
MIMO technology makes wireless transmission rates up to 600Mbps wifi antenna.
600Mbps Wireless Wifi USB Dongle/Wireless USB Adapter/Wireless Network Card
SKU: 100815
Raspberry Pi Cases
Raspberry 3B+ Injection Molding Case Supporting Camera
Compatible for All variants of the Raspberry pi 3 Model B
Easy to assemble and highly durable material
Uses: For Raspberry Pi surveillance camera shell
The horizontal angles are 360 degrees and 90 degrees, showing a large view of the camera.
SKU: 100913
Drone Transmitter and Receiver
Mini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter
Drone Transmitter and Receiver
Mini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter
Modulation type: GFSK
DSC port: PPM/I-BUS/S.BUS
Antenna length: 26mm(not including brass contacts)
Power input: 4.0-8.4V
No ground interference( transmitting and receiving 1m from the ground): > 300m
Operating current:40mA
Channel delay: < 15ms
SKU: 201001
Flight Controllers
DF13 4 Pin Flight Controller Cable
Item Name: DF13 4 Pin Flight Controller Cable
100% Brand new and high quality.
Weight: about 3g
Plug Type: DF 13 4 pin
Length: 200mm(26AWG).
Color: Red, and Black
Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
SKU: 201110